South Ozone Park’s #1 Data Recovery | Computer Consultants | Home & Office Networking | Remote Support
Speak with a real computer technician at Networks by DesignSpeak with a Real Technician516-889-0777 Computer Workshop Location for Networks by DesignStop by our Office Workshop51 Alabama Avenue,
Island Park, NY
24/7 Computer Emergency Repair Drop-Off CenterAfter Hours & Weekend Drop Off10 W Broadway Suite 11L
Long Beach, NY
NOD32 Antivirus Software - Buy It Now

South Ozone Park Commercial Wifi Installation, Repair & Consulting Services

Networks by Design, Inc. has Commercial WiFi Services that have technicians located on South Ozone Park, New York. We have a combined experience of over 25 years in South Ozone Park Computer Networking & wireless networking troubleshooting and consulting. We have worked with many business owners and IT professionals assisting them in their journey to turn their building into a Commercial Wi-Fi hotspot on South Ozone Park. Our staff is able to guide you through the entire process from getting your computers from a wired network to a complete wireless environment.

4 Steps to Starting Your Commercial Wifi Setup:
  1. Tell us your needs
  2. Setup a walkthrough
  3. Read a Simple No Obligation Proposal
  4. Agreeing to start the work

  Our consultants are able to:
 
  • Plan out the proper coverage area
  • Tip and Run Necessary Cables
  • Hide any visible wires
  • Troubleshoot, Configure Entire Network
  • Static IP's
  • Recommended parts
  • Buy the proper hardware
  • Install all of the proper drivers
  • Get the internet running fully
  • Setup secure network
  • Remote desktop setup / troubleshoot
  • VPN
  • Share folders, files throughout network
  • Setup users with permissions
  • Testing hardware
  • Assist in the switchover from wired internet to secure wireless
  • Boost weak signals
  • and more

accessing a commercial wifi signal using a tablet device
Professional long island  commercial WiFi network repair, maintenance & installation


Specializing in South Ozone Park Secure Commercial Internet Network Solutions, Secure Wi-Fi Networking




call now 
Home or business, we come to you



 

South Ozone Park Building Wi-fi IT Professionals

Secure wifi icon

South Ozone Park Building Wifi Installation

Networks by Design, Inc. is fully capable of setting up your building(s) with flawless Wi-fi access in South Ozone Park. When calling us, let us know the size of your facility and be ready to have knowledge of your location.. Based on the material your building is made out of and span of which the signal has to cover. The process is simple; call us -- tell us some basic information -- setup an appointment -- receive a no obligation proposal -- the rest is up to you. Let our team of experts walk you through the whole process. We are not looking to replace your IT staff we are just allowing them to focus on there job as we take your building and install the Wi-Fi internet.
 

South Ozone Park Building Wifi Repair

Many times after your internet is setup there might be some glitches in the system. Our team at Networks by Design, Inc. will be able to properly diagnose all of your problems and get your building back online using the Wi-fi you pay for and depend on. Please just give us a call and let us know the problem you are having; sometimes it could be system wide outage, sometimes it could be just an isolated issue. Either way let us know what the problem is and who is effected and we will dispatch a technician as soon as possible.




Call now
Home or business, we come to you



 

Our South Ozone Park wireless networking service technicians Repair problems like

wifi installation and repair icon






 


South Ozone Park, NY WiFi Consultants

Looking to go wireless but don't know what is needed to get going?

WiFi Consultant mapping a commercial wifi network

When a customer calls Networks by Design, Inc. to give us work to do, we most likely will explain that we would like to do a walkthrough first.  A walkthrough is where a Networks by Design, Inc. technician will schedule with the customer a time to do an inspection of what the customer wants us to do.  Then Networks by Design, Inc. will make a Proposal to email to the customer, if any parts have to be ordered.  If the job is simple and does not require any parts to be purchased, then work has the potential of being completed that same day, but will be determined by the on-site Networks by Design, Inc.  technician. 

Walkthroughs are free, however if it takes more than an hour of travel time from Long Beach, NY to the customers location, then a Networks by Design, Inc. Technician will inform the customer about our Hourly charge and how long it will take from Long Beach, NY to the customers location of travel time.  If the Customer wants us to proceed, then payment will be expected the same day of the Walkthrough.  If the customer wants to proceed with the proposal that was emailed to them and if there was a charge for the walkthrough, the charge of the walkthrough will be returned back to the customer.  This will show up in the Labor Section of the Proposal.
 


Our South Ozone Park Wifi Repair service technicians confront problems like
 

Call now 
home or business, we come to you!


 

Common Customers Questions 


What is Wireless Networking? – Any computer/device that can communicate with other computers/devices, without a wire connected to it.  Wireless Networking came out before Wireless Access Points and Wireless Routers, just in another form.  Two examples of wireless networking that are not related to computers but not limited to are, your remote to lock/unlock your car doors, and remote to turn on and off your TV.  This term has mainly been used to allow wireless devices to communicate to the internet.

Why would I should I choose a Wire connection over a wireless connection? – We all Love to go wireless, the ability to pick up a device and use it while not being plugged into a wall.  However what most people don’t know is that wireless now days is very hard to work with.  Wireless Range Coverage is acceptable to any interference to some degree from: other wireless devices broadcasting their signal, outdoor interference, cell phones, Garage Door Opener, Remote Car Starts, Remote Control for Home Entertainment, outdoor weather, Smoke Detector, and etc.  We have seen some Wireless Bands completely hide on devices, until we have moved that wireless device that was broadcasting that wireless signal to a location where wireless interference was low.  We are not saying you should forget about wireless all together, but we will recommend that the wireless devices be kept to a minimum, to avoid wireless headaches.   We have some customers that have installed everything in their house to use a wireless connection, once they are done there is little to no internet left, so they can stream Netflix, or browse the Internet.  A wireless connection may be a simple and cheap compared to a wired connection, however it might cause expensive headache in the future.

What is the Difference between Bluetooth and Wireless? – Bluetooth is a form of wireless, except its small range is up to about 50 feet.  This is why this technology mainly stays in cell phones.  You would not want to install Bluetooth Repeaters every 20-30 Feet, that would not be cost effective.

What is Dual Band? – To make computers wireless and to have wireless range cover your building, they need to operate at certain frequencies.  Wireless-G operates up to 300Mbps at 2.4Ghz and Wireless N (AC) operates at 5.8Ghz band up to 1.3Gbps speed or sometimes even faster.  Most new devices now a days are Dual Band capable, but not all of them can broadcast both frequencies at the same time.  Most wireless cards in devices like: phones, laptops, computer, and etc. can only connect to one band at a time.  Some devices like: Routers, Wireless Access Points (WAP), Repeaters, Extenders and etc. can broadcast both bands at the same time, which is very useful if you are trying to connect old devices to wireless.  Wireless-G (2.4Ghz) band is a slow speed compared to Wireless-N (5.8Ghz), however Wireless-G(2.4Ghz) band gives you a much better range.

What is a Wireless Access Point (WAP)? – A Wireless Access Point (WAP), is a device that allows devices like: computers, laptop, cell phones, etc. to be able to connect to it and communicate over an Cat 5e/Cat6 Ethernet Wire. A (WAP) will broadcast any name that is assigned to the SSID name.  This can either be the same as another (WAP) or can have a new SSID name.  Networks By Design, Inc. recommends these and only these Devices for expanding the Wireless Coverage in a Building, However they will require a minimum of one Ethernet Cable to the location of Installation, sometimes Electrical Power may be required at the location as well.

What is a Wireless Repeater and how is it different from an Wireless Extender? – A Wireless Repeater and a Wireless Extender usually refers to the same device, just different name.  They both extend the Wireless Coverage throughout the building.  Usually Wireless Repeaters get their name because they make a weak wireless signal strong.  Some may say they boost the Wireless Coverage.  Wireless Extenders sometimes require a wire connected to them, either coax and/or Cat 5e/Cat 6 Ethernet Wire.  Some Wireless Extenders do not require any configuration at all, where most Wireless Repeaters may require some level of configuration and generally don’t need any wires except to power them, almost giving you a minimum amount of freedom as long as they are place by an outlet. Networks By Design, Inc. does not recommend these devices, because they are not an effective solution to extend wireless coverage in a building.  These devices tend to slow down a wireless network, then to keep the speed moving.  These devices also tend to create their own loopback, creating problems for any device that is trying to connect to the internet.  Just because you are shown you are connected, does not mean you are.

I am having problems with my Wireless Range Coverage in my building, can you come and see what is going on? – Yes we can.  First Please call us and explain in detail (the best you can, we understand) any problems you might be having with your wireless coverage and we will dispatch a Technician to the building in question to observe what is going on, if the Technician thinks they can fix the problem on-site, right then and there, great.  However most the time, the technician will have to do a walkthough up to 1 hour of on-site time and write up a proposal for new equipment to make your wireless coverage, cover your selected areas of focus or the entire properly.

Does your company also extend my wireless coverage outside? – Yes we can and we have.  These Wireless Access points (WAP) are usually more money, because they are designed to handle the outdoor weather elements and usually because wiring has to be bought outside for these devices.  By positioning an indoor (WAP) does not always guarantee good wireless coverage.

How come even though I am right on top of one of the (WAPs) my device still shows me connected to the other (WAPs)? – This is a major problem with any device that is wireless.  Some Wireless Access Points, can be installed with an additional monitoring system that can control which device is connected to the closest (WAP), usually more money.  There are some software out there, that can take over the wireless card in that device and will be able to manage the WAPs better, some of these might require non-refunded money.  The reason why this tends to be a major issue, is due to the fact that these devices hanging on to the wireless connection until it drops the connection.  This usually meaning that the device has to go beyond the range of the connected WAP, before the device connects to the closes WAP for a stronger signal.  Sometimes turning on and off the Wireless on the Device helps, this usually forcing the Wireless Card in the device to automatically connect to the closes WAP.  Even though we all want every time in an instant and automatically do those minor tasks for us, technology still is not quite there yet.  Give it time and hopefully new wireless devices will get better with being proactive and picking out the closes WAP and make the connection, giving you the fastest speeds possiable.

Is it possible that the farthest away I am from the Router or WAP the slow the speed will get? – Yes, the farthest you go from these devices the slower the speed will appear, because you of the distance the wireless has to go to reach your device.

How come my wireless range is not good and I am right next to the Router/WAP? – This will require an on-site visit from one of our Technicians to see what the problem can be.  There are too many variables to tell which one is the one causing the problem.  One of our customers had his wireless Camera system to his DVR system interfering with his wireless Range coverage in his house, the only way we found this was to turn off the DVR system and Wireless Camera System and we watched the wireless range get better.  A Technician will bring some testing equipment to see what could be causing the
 
Networks by Design Truck for onsite computer repair


Like us on Facebook Yelp Reviews Angies List Reviews BBB - Better Business Bureau Reviews